The market prospects for precision medical molds are vast. Let me tell you the things to consider when designing

1: The shape and dimensional accuracy of the formed object, the flow direction of the resin, the transmission of injection pressure, and the solidification of the filled resin. As a mold designer, it is important to be aware of the requirements of the product, which is also the source of precision medical mold design. So it is essential to have a thorough understanding of the requirements for the product.

2: The characteristics of the formed product need to be systematically listed, mainly in terms of materials. The shape of the formed product will have a basis for some details in the mold design below.

3: The structure of the mold. The structure of precision molds is different from that of ordinary molds. There may be several feasible structural design schemes for ordinary molds, but for precision molds, some structures may have certain impacts, so the structural schemes for some precision medical molds may be very demanding. Mainly considering the impact of mold action on the product.

4: The rigidity and strength of the target are important in my personal experience. I often see that some samples of hibiscus embryo and inner birch materials are used in a very simple manner. I can only say that perhaps his birch mesh can be produced, but some products have problems with it

The strength of the mold is closely related and sometimes difficult to detect.

5: The inlet and transverse rubber channel are important factors in controlling the product. Precision molding has certain requirements for the glue injection method of the product. Making the glue points beautiful can have unimaginable effects on the product

6: Mold temperature control circuit, the mold should be controlled at a uniform temperature. It is necessary to set the temperature difference required for the direction of resin flow, and corresponding measures should be taken for changes in meat thickness. At the moment when the formed product leaves the mold, the surface temperature of the mold in the product department should be uniform. This requires a reasonable mold cooling system

7: The precision requirements for precision molds are very high, and the processing method adopted for processing molds is very important. According to the shape of the formed product, the mold cavity of the product section is divided, and slow wire cutting is commonly used. So when designing, we need to consider the processing method

8: The mold structure should be reasonable to facilitate the addition of other solutions. For example, a position may not be ideal, and if it is indeed not ideal after trial molding, a remedial plan should be adopted.