The multifunctional test tube rack consists of a base and a test tube frame body. The test tube frame body is equipped with multiple test tube insertion holes. The test tube frame body is divided into two layers, high and low, and supported by six columns between the supports. The upper layer of the test tube rack body has two rows of large test tube insertion holes, and the lower layer has three rows of small test tube insertion holes, suitable for different specifications of test tubes.

Suitable for medical screening and laboratory analysis in various disciplines, with test tubes arranged during experiments. Reasonably designed, aesthetically pleasing, lightweight, durable, susceptible to bacterial infection, and easy to clean and sterilize, it is an ideal substitute for various existing test tube shelves. Made of stainless steel wire, specifications can be customized according to customer requirements.

What are the precautions when using a multifunctional test tube rack? Let's all analyze together below.

1. Do not place items heated with red heat on the test tube rack to prevent it from burning

2. The cleaned test tube should be placed upside down on the test tube rack and pulled out as soon as possible

To prevent contamination, keep the test tube shelves clean.

The multifunctional test tube rack comprises a bracket and a bracket, which are connected to each other by a lifting rod. The bracket has a test tube fixing hole, and a spring clip is fixed in the test tube fixing hole. The bracket has a guide hole at the position corresponding to the test tube fixing hole. This utility model adopts the above technical solution, and the spring clamp can fix the test tube clamp to prevent the test tube from tilting and shaking. If the test tube needs to be heated, the bracket can be lifted to a certain height by a lift to heat the test tube. After heating is completed, the support height can be lowered by the lifting rod, and the bottom of the test tube can be placed into the guide hole for cooling. No need to find a separate iron bracket. Easy to operate, the spring and guide block settings can provide a buffering effect.

The multifunctional test tube rack is washable, corrosion-resistant, and durable. It is a set of different specifications of test tubes and centrifuge tubes that can meet the needs of various experimental work. The multifunctional test tube rack is equipped with silicon pads at the unique bottom, made of special plastic. The test tube rack is sturdy and fragile, and can accommodate various test tubes. The front and back sides can hold test tubes, which can be freely lifted and lowered, and are resistant to high and low temperatures (can be placed in a water bath pot, and can withstand temperatures within 100 degrees). It is suitable for various sizes of test tubes in ordinary laboratories and laboratories. The test tube frame can be reversed, and the test tube does not deviate from the test tube frame, making it particularly suitable for vacuum vessels, etc. The advantage of this multifunctional test tube rack is that it can be used for test tubes of all sizes and specifications, with convenient color contrast and easy observation. The rubber partition on the test tube rack serves as a buffer, making it less likely for the test tubes to rupture, and making the experiment convenient.